Electrolux CS 7 Product Description page 12

Setting new values
Press "Oven temperature"
Press "Meat probe"
(core temperature)
When the button's LED lights,
it isactivated for setting.
The last setting flashes on
the display for 5 seconds.
Set the new value
using the"Setting knob"
when the button's LED comes on.
NOTE! The oven temperature cannot be set lower than 5°C above the set core temperature.
Hold finished
The display "Meat probe" flashes when the core temperature
has reached the set time.
xx
xx
Possible actions during Hold
Cancel cooking:
Press "Stop"
NOTE!
Settings are NOT cancelled
when the door is opened
during cooking.
Delete Hold settings
Press "Stop" for 1.5 seconds.
LEDs and displays are dimmed.
The actual temperature is shown
Check or change the oven temperature and core temperature.
Press the actual step,
For 5 seconds flash
set Oven temperature
or
set Core temperature
Set the new value using the "Setting knob"
when the button's LED is lit.
Start
Press "Start"
The LED lights.
The displays show
- actual oven temp.
- HOLD
- actual core temp.
The fan runs at intervals
Cancel Hold
Press "Stop"
The LED goes out
The time display - HOLD - dims
or retur ns to the previous
setting.
The displays show
- Actual oven temperature
- Actual core temperature
xx
xx
1 7