Table of Contents
Advertisement
Saving the Dump File
Press the DUMP switch to save the dump file when an error occurs. Insert a metal pin (a straightened large paper clip
will make a substitute) into the switch hole to press the DUMP switch.
Pressing the DUMP switch saves the dump file in the specified directory. (Memory dumping may not be available when
the processor stalls.)
IMPORTANT:
having a minimum length of 1 inch (25 mm).
Recovery for Windows Server 2003 x64 Editions and Windows Server
2003
If the system fails to start for some reason, recover the system using the recovery console. However, recovery using this
method should be performed only by a system administrator or a user who has an expert knowledge of this subject. See
the Online Help for details.
Do not use a toothpick or plastic stick that could easily break. Use a pin
25 mm or longer
DUMP switch
8-58
Advertisement
Table of Contents
