Adjusting The Side Guides - Kodak i620 User Manual

Adjusting the side
guides
3-4
Maximum Document Size: 30.5 x 66 cm (12 x 26 in.). Documents
larger than 43 cm (17 in.) require operator assistance.
Paper inks: All inks on the paper must be dry before scanning is
started. This includes: Standard offset printing, Inkjet printer, Thermal
transfer, Handwriting inks.
Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other
similar correction fluids.
Feeder Capacity: The elevator tray can hold up to 500 sheets of
2
75 g/m (20 lb.) paper.
To accommodate multiple applications with variable feeding
requirements, the side guides can be adjusted for right-, left- or center-
edge feeding. Center-feeding is recommended for best paper handling
performance. The side guides can be moved together or independently
to achieve offset feeding.
1. Pull the side guides all the way out and then push them together
(toward the center) to reset or center them.
2. Open the side guides slightly wider than the documents you will be
feeding.
3. Place the documents in the elevator tray.
4. Adjust the side guides to fit the documents.
A-61500 January 2004