The Document Printer; Overview - Kodak i620 User Manual

4 The Document Printer

Overview

A-61500 January 2004
The Kodak i600 Series Scanners include a factory-installed, pre-
configured document printer. The printer operates at full scanner
speed, and prints on the document before scanning on the front side of
the document (top side as placed in the elevator tray). The document
printer can add a date, time, fixed string, and/or sequential number on
document fronts.
NOTE: Due to the pre-scan location of the printer, if a toggle patch is
scanned, it will be printed on and could potentially cause
problems with the recognition of the patch by the scanner. It is
recommended that printing not be enabled when using the
toggle patch.
IMPORTANT:Clean the scanner's paper path components daily when
using the document printer.
The document printer is unique in that the document print string can be
configured to include both literal (static) information (i.e., information
that stays the same for each document, such as batch name or
operator) and dynamic information (i.e., information that may change
for each page scanned, such as sequential document number). The
software controls static fields; any information that the software allows
you to enter can be sent to the printer.
For detailed information, see the Image Processing Guide for Kodak
i600 Series Scanners, A-61405. This guide can be downloaded from
www.Kodak.com/go/docimaging.
All printer controls and functions are accessible through ISIS and
TWAIN drivers. Printing must be enabled or disabled for each scan
session. A maximum of 40 characters, which can include any
alphanumeric and special characters from the printable ASCII character
set is allowed. Characters from the following font are supported:
Microsoft Global IME 5.01.
4-1