Purging An Ink Cartridge - Kodak i620 User Manual

Purging an ink
cartridge
4-4
One ink cartridge is included with the i600 Series Scanners. Additional
ink cartridges can be ordered. See Chapter 5, "Supplies and
accessories".
You must purge the ink cartridge before installing it.
1. Remove the ink cartridge from the box and inner wrappings.
2. Hold the cartridge and insert a straightened paper clip into the larger
hole on the top of the ink cartridge.
3. Rotate the ink cartridge until the bottom is face up.
4. Gently press the paper clip against the side of the ink bladder
untilasmall bead of ink appears on the ink flow point on the ink
cartridge bottom.
CAUTION:Do not puncture the ink bladder with the paper clip.
5. Remove the paper clip.
6. Allow the ink bead to absorb back into the ink cartridge.
7. Blot the excess ink with a lint-free tissue.
CAUTION: Do not touch the ink flow point or you may cause
improper ink flow.
IMPORTANT: If you get ink on your hands, wash them with soap and
water.
A-61500 January 2004