Auxiliary Function; Warning Indicators; Starting The Programme; Started - Beko DC 7112 W User Manual

Operating the product

6.6 Auxiliary function

Low temperature
This function allows for drying at lower
temperatures and therefore saves energy.
Warning LED will light up when you select
the function.
C
You must use this function when
you dry your synthetic or delicate
laundry.

6.7 Warning indicators

C
Warning indicators may differ
according to the model of your
dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning light
lights up continuously, please
refer to, "Suggested solutions for
problems".
Water tank
A
Warning LED will light up at the
end of the programme or when
the tank is full with water. The
machine stops operating when
this warning LED lights up during
a programme running. To restart
the machine, please drain the
water in the water tank. Press
"Start/Pause/Cancel" button
to start the programme after
you have emptied the water
tank. The warning LED goes off
and the programme resumes
operating.
Dryer / User Manual

6.8 Starting the programme

1. Press "Start/Pause/Cancel" button to
start the programme.
2. Light of the "Start/Pause/Cancel"
button will turn on to indicate that the
programme has started.
Timer follow-up indicator
One of the LEDs is on as far as programme
runs and shows the approximate remaining
time.
6.9 Changing the programme
after the programme has

started

You can use this feature to dry your laundry
in a different programme after your machine
has started to run.
For example;
Press and hold the "Start/Pause/Cancel"
button for about 3 seconds to select "90"
minutes programme instead of "60" minutes
program.
Select the "90" minutes programme by
rotating the program knob.
Press "Start/Pause/Cancel" button to start
the programme.
C
The program which is selected
first will go on even if the
programme selection button is
moved and another programme
mode is selected while the
machine is operating. You must
cancel the ongoing programme
in order to change the drying
programme. (See, Ending the
programme through canceling)
Adding/removing laundry in standby
mode
In order to add or take out laundry after the
start-up of the programme;
1. Press the "Start/Pause/Cancel" button
to switch the machine to "Pause" mode.
Drying process will stop.
2. Open the door at Pause position and close
it again after adding or taking out laundry.
3. Press "Start/Pause/Cancel" button to start
the programme.
23 / EN