Child-Proof Lock; Ending The Programme Through Cancelling; End Of Programme - Beko DC 7112 W User Manual

Operating the product
C
Any laundry added after the
drying process was started may
cause the already dried clothes
in the machine intermingle with
wet clothes and the result will
be wet laundry after the drying
process is over.

6.10 Child-proof lock

There is a childproof lock to prevent any
programme interruption due to the pressing
of keys while the programme is on. The
loading door and all keys except the "On/Off"
key on the panel are deactivated when the
child-proof lock is active.
In order to activate the childproof lock,
press on the "Start/Pause/Cancel" and "Low
temperature" buttons simultaneously for 3
seconds.
To start a new programme after the
programme is over or to interrupt the
programme, the childproof lock should be
deactivated. To deactivate the childproof
lock, press the same buttons for 3 sec.
C
One of the LEDs on the
programme follow-up indicator
starts flashing when the child-
proof lock is activated.
C
Child-proof lock is deactivated
when the machine is restarted
by pressing the On/Off button.
6.11 Ending the programme
through canceling
The programme which is selected first will
keep on going even if the position of the
programme selection button is changed. A
new programme can be selected and started
24 / EN
after "Programme cancel" is activated in
order to change the drying programme.
To can cel any selected programme;
• Press "Start/Pause/Cancel" button for
about a duration of 3 seconds. The "Filter
cleaning" and "Water tank" warning LEDs
as well as the "0" warning LED on the
programme follow-up indicator will light
up at the end of this period for reminding
purposes.
A
As the inside of the machine will
be excessively hot when you
cancel the programme while the
machine is running, activate the
ventilation programme to cool it
down.
The machine will not start even if the "Start/
Pause/Cancel" button is pressed, unless the
programme selection knob is returned to the
initial programme. The paused programme
must be cancelled in order to change the
drying programme.

6.12 End of programme

The "Filter cleaning" and "Water tank"
warning LEDs as well as the "0" warning
LED on the programme follow-up indicator
will light up at the end of the programme.
The door can be opened and the machine
becomes ready for a second cycle.
Press the "On/Off" button to shut down the
machine.
C
A 2-hour anti creasing
programme to prevent laundry
from creasing will be activated if
you do not take the laundry out
after the programme has come
to an end.
C
Clean the filter after each drying
(please see, Filter cleaning).
C
Drain the water tank after each
drying (please see, Water tank)
Dryer / User Manual