Please read this user manual first! Dear Customer, WARNING! Thank you for prefering a Beko product. We hope that your product which has been • Warning against hot surfaces. manufactured with high quality and technology will give you the best results. We advise you...
1 Important instructions for safety and environment WARNING! NOTE Always have the installation and • This section contains safety repairing procedures carried instructions that will help protect out by the Authorized Service. from risk of personal injury or Manufacturer shall not be held property damage.
1.1.1 Electrical safety DANGER! DANGER! • Do not use extension cords, multi- plugs or adaptors to connect the • Electrical safety instructions dryer to power supply in order to should be followed while electrical decrease the risk of fire and electric connection is made during the shock.
Page 5
DANGER! DANGER! Points to be taken into • Never stop your dryer before the programme completes. If you must consideration for fire hazard: do this, remove all laundry quickly Below specified laundry or items and lay them out to dissipate the must not be dried in the dryer heat.
1.2 Mounting over a washing machine WARNING! • A fixing device should be used between the two machines when installing the • Never attempt to repair the dryer dryer above a washing machine. The by yourself. Do not perform any fitting device must be installed by the repair or replacement procedures authorized service agent.
1.4 Child safety 1.8 Technical Specifications • Packaging materials are dangerous for the children. Keep packaging materials Height (Min. / Max.) 84,6 cm / 86,6 cm* away from children. • Electrical products are dangerous for the Width 59,7 cm children. Keep children away from the Depth 56,8 cm product when it is operating.
2 Your Dryer 3 Installation 2.1 Overview Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. If they are not suitable, contact a qualified electrician and technician to make necessary arrangements.
• The rear surface of the tumble dryer shall be placed against a wall. NOTE • Make sure that the discharge hose is tight DANGER! after it is connected to the drain in order to obtain a better water flow since the •...
4 Preparation • For models with a condenser unit: clean the condenser once in a month or after every 30 operations regularly. . 4.1 Laundry suitable for drying in the • Clean the filter periodically.Read the dryer Maintenance and cleaning of filters for Always obey the instructions given on the detalied information.
5.4 Programme selection and consumption table Programmes Programme Description 1000 You may dry your cotton laundry to be ironed in Cottons Iron Dry this programme to have them slightly damp for 1000 ease ofironing. (Shirt, T-shirt, tablecloth, etc.) 1000 You may dry all your cotton laundry in this programme.
Page 13
Cancelling the end time function * : Energy Label standard programme (EN 61121:2012) If you want to cancel the end time countdown All the values on the chart are identified and start the programme immediately: according to EN 61121:2012 standard. Cancel the programme by turning the On/ Consumption values may vary from the Off/Programme selection knob.
NOTE NOTE • When the child lock is activated, the child • Adding laundry after the drying operation lock warning indicator on the screen starts may cause the dried laundry inside the turns on. machine to mix with wet laundry and leave the laundry damp at the end of operation.
A layer can build up 6 Maintenance and cleaning on the filter pores that can cause clogging Service life of the product extends and of the filter after using frequently faced problems decrease if cleaned the dryer for a while. at regular intervals.
Drain the water in the tank. • If there is lint accumulation in the funnel Clean the condenser of the water tank, clean it under running by applying water. pressurized water with a shower armature • Place the water tank into its seat. and wait until the water drains.
7 Troubleshooting Filter cleaning warning symbol/LED is on/flashing. Fibre filter might not be cleaned. >>> Clean the filter. The filter slot might be clogged with lints. >>> Clean the Drying operation takes too long. filter slot. Fibre filter pores might be clogged. >>> Wash the filter A layer of fluff might have accumulated clogging up the lint with warm water.