3
PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1.
Check of multiple input module specifications
Check the multiple input module specifications. (Page 14 SPECIFICATIONS)
2.
Installation of multiple input module
Install a multiple input module to a CPU module. For details, refer to the following.
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
3.
Wiring
Perform wiring of external devices to a multiple input module.
4.
Adding a module
Add a multiple input module to a module configuration by using GX Works3.
When adding a new multiple input module, if selecting the module whose module model name has "(FX2N)"
at the end, it can be used as FX2N allocation mode.
• FX5-8AD: Normal mode
• FX5-8AD(FX2N): FX2N allocation mode
5.
Parameter settings
Set parameters of the multiple input module by using GX Works3. (Page 82 PARAMETER SETTING)
6.
Offset/gain setting
When setting the user range, perform the offset/gain setting.
7.
Programming
Create a program.
3 PROCEDURES BEFORE OPERATION
3
23