2.1.8 MPT-HC V2
MPT-HC V2 is similar to MPT-HC from architecture standpoint and can be used as spare part of the MPT-
HC. The differences are:
–
MPT-HC V2 can be natively Ethernet powered through a proprietary PFoE (or as alternative by using
two cables, one coaxial cable for the Power Supply and one optical cable for the Ethernet Traffic (as
MPT-HC)
–
MPT-HC V2 is XPIC-ready by the installation of a dedicated module.
9500 MPR Rel. 3.1
56/980
3DB18809AAAA Issue 1
Figure 15. MPT-HC V2
User Manual
Product information and planning