Power Injector versions
Two versions are available:
1)
Power Injector plug-in: installed in the MSS shelf and powered through the backplane.
The Power Injector plug-in is not managed by MSS. The Plug-in just needs an empty slot to
be inserted in. As consequence, no specific commissioning activity is needed to insert a Power
Injector plug-in on a existing MSS shelf.
2)
Power Injector box: stand-alone box, powered through two connectors on the front providing
power supply redandancy. The box can be mounted in a rack by means of a separate bracket.
The bracket can support two boxes side by side. Height: 1,3 U.
Connectors
–
Two DC connectors in the front (for box version), or power from the backpanel (for plug-in version).
–
Two RJ45 for the data in (DATA)
–
Two RJ45 for the data + DC out (DC+DATA)
LEDs
–
Two LEDs indicate the presence of DC voltage on each Ethernet output.
User Manual
Product information and planning
Figure 56. Power Injector plug-in
Figure 57. Power Injector box
Figure 58. Power Injector front panel
3DB18809AAAA Issue 1
9500 MPR Rel. 3.1
137/980