Alcatel-Lucent 9500 MPR User Manual page 179

[3] TDM to TDM flow
– Definition: This service identifies a flow inside MPR network, in which STM-1 is transparently trans-
ported, switched and terminated.
– Application: Typical microwave transport application.
[4] ETH to ETH flow
– Definition: Ethernet traffic is transported and switched automatically by the standard auto-learning
algorithm of the built-in MPR 10 Gbit Ethernet switch.
– Application: Typical microwave 3G backhauling/WiMax application, in which transport of Ethernet
packets coming from basestations is requested.
[5] "ATM2ATM" flow
– Definition: 9500 MPR terminates the native IMA/ATM and performs encapsulation/extraction of
those ATM flows into/from ATM PW packets according to RFC 4717. The 9500MPR facing the aggre-
gation network, the original ATM flows are re-built on ASAP board.
– Application: Typical microwave 3G backhauling application, in which transport of Ethernet packets
coming from 3G base station is requested.
[6] "ATM2ETH" flow
– Definition: 9500 MPR terminates the native IMA/ATM and ATM traffic, encapsulated in Ethernet
frames, is transported into IP/MPLS Core Network.
– Application: Typical microwave 3G backhauling application, in which transport of Ethernet packets
coming from 3G basestation is requested.
User Manual
Product information and planning 3DB18809AAAA Issue 1
9500 MPR Rel. 3.1
177/980