Alcatel-Lucent 9500 MPR User Manual page 161

2.8.8.4.1 Core-E protection Switching Criteria
The switching criteria are:
– Core Card Fail
– Core Card Missing
– Control Platform operational status failure
– Flash Card realignment in progress
– Flash Card failure
If the "Ethernet LOS Criteria" feature has been enabled the following additional switching criteria are
added:
– Card Fail of SFP optical module
– Card Missing of SFP optical module
– LOS of any Electrical User Ethernet interfaces, including the LOS of the forth User Ethernet interface
working as TMN Local Ethernet interface.
N.B. In case of stand-by Flash Card realignment in progress, the application SW refuses/removes
a manual switch command.
2.8.8.4.2 Port #5 and port #6 protection
– If in the Port #5 and/or port #6 a 2xE1 SFP or EoSDH SFP has been installed, the protection is
implemented by using special splitters (refer to paragraph 4.1.3.3 on page 584 and paragraph
4.1.3.4 on page 584).
User Manual
Product information and planning 3DB18809AAAA Issue 1
9500 MPR Rel. 3.1
159/980