Quick Start Configuration; Window Navigation - Cisco WAP125 Administrator's Manual

Quick Start Configuration

• Firmware Version (Non-active) - The firmware version of the backup image.
• Firmware MD5 Checksum (Non-active) - The checksum for the backup image.
Quick Start Configuration
To simplify the device configuration through quick navigation, the Getting Started page provides links for
performing common tasks. The Getting Started page is the default window at start-up.
Category
Quick Access
Advanced Configuration
More Information
For additional information on the device, you can access the product support page or the Cisco Support
Community by:
• Click Support to access the product support page.
• Click Forums to access the Cisco Support Community page.

Window Navigation

Use the navigation buttons to move around the graphical user interface of the WAP.
Configuration Utility Header
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
6
Link Name (on the Page)
Setup Wizard
Change Account Password
Backup/Restore Configuration
Upgrade Device Firmware
Wireless Settings
Management Setting
LAN Setting
Guest Access
Dashboard
TCP/UDP Service
View System Log
Traffic Statistics
Getting Started
Linked Page
Using the Access Point Setup
Wizard, on page 2
Adding a User, on page 22
Configuration Files, on page 95
Firmware, on page 93
Radio, on page 37
Management, on page 23
IPv4 Configuration, on page 9
Guest Access, on page 80
Dashboard, on page 87
TCP/UDP Service, on page 4
LED Display, on page 17
Traffic Statistics, on page 90