Adding A User; Changing A User Password - Cisco WAP125 Administrator's Manual

Adding a User

Use the User Accounts page to configure up to four additional users and change the user password.

Adding a User

Configure the following settings to add a new user:
Step 1 Select System Configuration > User Accounts.
The User Account Table shows the currently configured users. The user cisco is preconfigured in the system and has
Read/Write privileges.
All other users can have Read Only access, but not Read/Write access.
Step 2 Click ✚ to add a new row.
Step 3
Check the box for the new user and enter a name for the new user.
Step 4 Enter the New Password between 0 and 127 characters and then enter the same password in the Confirm New Password
field.
The Password Strength Meter field indicates the password strength as follows:
• Red — The password fails to meet the minimum complexity requirements.
• Orange — The password meets the minimum complexity requirements but the password strength is weak.
• Green — The password is strong.
Step 5
Click Save.
To delete a user, select the user name and click Delete. To edit an existing user, select the user name and click
Note
Edit, then click Save to save all changes made to the configurations.

Changing a User Password

To change a user password:
Step 1 Select System Configuration > User Accounts.
The User Account Table shows the currently configured users. The user cisco is preconfigured in the system to have
Read/Write privileges. The password for the user cisco can be changed.
Step 2
Select the user to configure and click Edit.
Step 3 Enter a New Password between 0 and 127 characters and then enter the same password in the Confirm New Password
field.
The Password Strength Meter indicates the password strength as follows:
• Red — The password fails to meet the minimum complexity requirements.
• Orange — The password meets the minimum complexity requirements but the password strength is weak.
• Green — The password is strong.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
22
System Configuration