Cleaning And Maintenance; Removing And Reseating The Pillows; Jet Remove/Replace; Spa Cover - Cal Spas F-1222 Owner's Manual

42

Cleaning and Maintenance

Removing and Reseating the Pillows

You can remove the pillows for cleaning
and maintenance quickly and easily.
This method works for all types of
pillows.
Grab the lower edge of the pillow with
both hands firmly and pull up. As you
do this, the pillow inserts will pop out
of the holes.
Reseat the pillows by aligning the pillow
inserts with the holes and striking the
pillow hard enough to insert the pegs
back into the holes.

Jet Remove/Replace

Jets can be easily removed for cleaning.
Grasp the outer rim of the jet and
turn it counter-clockwise. The jet will
unscrew from the fitting until it is free.
To replace the jet, place it in the fitting and
turn it clockwise until it is snug in place. Do not
overtighten the jet.

Spa Cover

Important! Keep the spa covered when not in use!
• Covered spas will use less electricity in
maintaining your set temperature.
• Covering your spa will protect your spa's
finish from the sun's ultraviolet rays.
• You are required to keep the spa covered to maintain warranty coverage.
• Covering your spa helps prevent children from drowning in the spa.
See the manual enclosed with your cover for instructions on mounting the locks and how to lock and unlock
the cover.
In addition, while the spa cover is rigid, it is not designed to support any weight. Therefore, as a safety
precaution and to preserve the life of your cover, you must not sit, stand, or lie on it, nor should you place
objects of any kind on top of it.
www.calspas.com
2017 Fitness Spa
LTR20171005, Rev. D