Cleaning And Maintenance; Removing And Reseating The Pillows; Jet Removal And Replacement - Cal Spas Home Resort Z-524L Owner's Manual

Cleaning and Maintenance

Removing and Reseating the Pillows

You can remove the pillows for
cleaning and maintenance quickly and
easily. This method works for all types
of pillows.
Grab the lower edge of the pillow with
both hands firmly and pull up. As you
do this, the pillow inserts will pop out
of the holes.
Reseat the pillows by aligning the pillow
inserts with the holes and striking the
pillow hard enough to insert the pegs
back into the holes.

Jet Removal and Replacement

Jets can be easily removed for cleaning.
Screw-in jet removal
Grasp the outer rim of the jet and turn
it counter-clockwise. The jet will unscrew
from the fitting until it is free.
To replace the jet, place it in the fitting
and turn it clockwise until it is snug in
place and it can be rotated freely about
half a turn. Do not overtighten the jet.
Snap-in SQR jet removal
Grasp the outer rim of the jet and turn
it counter-clockwise until it completely
stops. You may feel it slightly loosen pop
out a bit from the fixture. Pull the jet
out from the jet fixture. The jet will be
very snug and may require some force to
remove it. DO NOT PRY OUT JETS.
To replace any jet, place it in the fitting
and turn it clockwise until it snaps in and
can be rotated freely about half a turn.
Do not overtighten the jet.
2015 Portable Spa
LTR20151001, Rev. A
43
www.calspas.com