Adjusting Filtration - Cal Spas F-1222 Owner's Manual

16

Adjusting Filtration

Press
Then
Press
Press Light button
to select Filter 2
www.calspas.com
Main Filtration
Filter cycles are set using a duration. Each setting can be adjusted in 15-minute
Once
increments. Filter Cycle 1 and Filter Cycle 2 (if enabled) are set to the same
duration.
7X
If Filter Cycle 2 is enabled, Filter 2 will appear in the LCD. If Filter 2 is disabled,
Filter 1 will appear.
Shows start
time
to show RUN HRS
to show F1 ENDS xx:xx
to set
to set
Shows start
time
to show RUN HRS
to show F2 ENDS xx:xx
to set
Sets start Sets
hour minutes
Sets Filter 1 Selects part
length in hours of an hour
to set
Note: Waiting several seconds will lose any
new Filter 1 Start Time and Run Hours and
revert to the previous Filter 1 settings.
If you wait several seconds, it
will revert to original setting.
*****
to set
Sets start Sets
hour minutes
Sets Filter 2 Selects part
length in hours of an hour
to set
Note: Waiting several seconds will lose any new
Filter 2 On/Off, Start Time and Run Hours and
revert to the previous Filter 2 settings.
*****
Sets 15- minute
increments
If you wait
several seconds,
it will revert to
original setting.
*****
Sets 15-minute
increments
Main Screen
Main Screen
*****
Sets 15- minute
increments
*****
Sets 15-minute
increments
Main Screen
2017 Fitness Spa
LTR20171005, Rev. D