Tp800 Control Panel Operation - Cal Spas F-1222 Owner's Manual

20

TP800 Control Panel Operation

The Main Screen
Spa Status
When the spa has finished priming,
you will see the Main Screen.
Important information about spa
operation can be seen quickly from
the Main Screen. The most important
features can be accessed from this
screen.
• The actual water temperature
can be seen in large text and the
desired, or Set Temperature, can
be selected and adjusted.
• Time-of-day, ozone operation and
filter operation status are shown,
along with other messages and alerts.
• Temperature Range (High or Low) is indicated in
the upper right corner.
• A Lock icon is visible if the panel or settings are
locked.
Navigation
There are four selections you can make on the Main
Screen:
Set temperature - Press the left arrow button to
change the Set Temperature number to white. The
www.calspas.com
Water Temperature
Desired Temperature Pump and Heat
102°F
Set: 104°F
8:32 PM
Ozone
Filter 1
Status
Ready in Rest Mode
Heating
Messages
Set Temperature can then be adjusted with the up
and down buttons. Pressing the Select button or the
Right Arrow button will save the new set temperature.
Menu selections - The three menu choices on the
right, Spa, Shortcuts, and Settings, can be selected
and the screen will change to show more detailed
controls or programming functions. They will be
discussed further in this section.
Messages
At the bottom of the screen, messages may appear
at various times. Some of these messages must be
dismissed by the user (see page 24).
Temperature Range
Left, Right, Up, Down
and Select Buttons
High Range
Spa
Scenes
Settings
Menus Lock Indicator
2017 Fitness Spa
LTR20171005, Rev. D