Olivetti d-Color MF2613 Plus Service Manual page 265

4. Remove the right rear cover, right cover
and right lower cover (see page 1-5-6).
5. Remove the controller shield (see page
1-5-30).
6. Remove connector (YC32) from main
PWB.
7. Cut the band and then remove the it.
8. Remove the DP wire and ground wire
from wire holder.
9. Close the scanner unit.
Y116670-7
YC32
Figure 1-5-129
Figure 1-5-130
1-5-79
Main PWB
Main PWB
Wire holder
DP wire
Ground wire
Service Manual
2PX/2PY
Band