Olivetti d-Color MF2613 Plus Service Manual page 136

Code
0100 Controller sequence error
0105 Registration sensor not
detected
0106 Controller sequence error
0110 Inner tray open
0111 Rear cover open
0112 Front cover open
0120 Controller sequence error
0121 Controller sequence error
0211 Rear cover open (paper
feeder 1)
0212 Rear cover open (paper
feeder 2)
0501 No paper feed from cassette
1
0502 No paper feed from cassette
2
0503 No paper feed from cassette
3
0508 No paper feed from duplex
section
0509 No paper feed from MP tray
0511 Multiple sheets in cassette 1
0512 Multiple sheets in cassette 2
0513 Multiple sheets in cassette 3
0518 Multiple sheets in duplex
section
0519 Multiple sheets in MP tray
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-1).
Service Manual
Contents
Secondary paper feed request given by the con-
troller is unreachable.
Activation of the registration sensor (on/off) is
undetected for 90 s during printing.
Paper feeding request for duplex printing given by
the controller is unreachable.
The inner tray is opened during printing.
The rear cover is opened during printing.
The waste toner cover is opened during printing.
Paper feed request was received from the duplex
section despite the absence of paper in the duplex
section.
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
The rear cover of paper feeder 1 is opened during
printing.
The rear cover of paper feeder 2 is opened during
printing.
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette.
PF feed sensor 1 (PFFS1) does not turn on during
paper feed from paper feeder 1.
PF feed sensor 2 (PFFS2) does not turn on during
paper feed from paper feeder 2.
The registration sensor (RS) does not turn on dur-
ing paper feed from duplex section.
MP paper conveying sensor (MPPCS) does not
turn on during paper feed from MP tray.
The registration sensor (RS) does not turn off dur-
ing paper feed from cassette.
PF feed sensor 1 (PFFS1) does not turn off during
paper feed from paper feeder 1.
PF feed sensor 2 (PFFS2) does not turn off during
paper feed from paper feeder 2.
The registration sensor (RS) does not turn off dur-
ing paper feed from duplex section.
MP paper conveying sensor (MPPCS) does not
turn off during paper feed from MP tray.
Conditions
1-4-2
2PX/2PY
Jam
location*
C
-
E
-
-
-
E
E
-
-
A
F
G
E
B
A
F
G
E
B
Y116670-7