Olivetti d-Color MF2613 Plus Service Manual page 170

Problem
(11)
Registration clutch
does not operate.
(12)
Middle clutch does
not operate.
(13)
MP solenoid does
not operate.
(14)
The message
requesting paper to
be loaded is shown
when paper is
present on the cas-
sette.
(15)
The message
requesting paper to
be loaded is shown
when paper is
present on the MP
tray.
(16)
The size of paper
on the cassette is
not displayed cor-
rectly.
Service Manual
Causes
1. Defective connector
cable or poor con-
tact in the connector.
2. Defective clutch.
3. Defective PWB.
1. Defective connector
cable or poor con-
tact in the connector.
2. Defective clutch.
3. Defective PWB.
1. Defective connector
cable or poor con-
tact in the connector.
2. Defective solenoid.
3. Defective PWB.
1. Defective connector
cable or poor con-
tact in the connector.
2. Deformed actuator of
the paper sensor.
3. Defective paper sen-
sor.
4. Defective PWB.
1. Defective connector
cable or poor con-
tact in the connector.
2. Deformed actuator of
the MP paper sensor.
3. Defective MP paper
sensor.
4. Defective PWB.
1. Defective connector
cable or poor con-
tact in the connector.
2. Defective cassette
size switch.
3. Defective PWB.
Check procedures/corrective measures
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Registration clutch and engine PWB (YC3)
Replace the registration clutch.
Replace the engine PWB and check for correct operation
(see page 1-5-27).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Middle clutch and engine PWB (YC3)
Replace the middle clutch.
Replace the engine PWB and check for correct operation
(see page 1-5-27).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
MP solenoid and engine PWB (YC4)
Replace the MP solenoid.
Replace the engine PWB and check for correct operation
(see page 1-5-27).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Cassette PWB (YC1) and engine PWB (YC21)
Check visually and replace if necessary.
Replace the cassette PWB.
Replace the engine PWB and check for correct operation
(see page 1-5-27).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
MP paper sensor and engine PWB (YC16)
Check visually and replace if necessary.
Replace the MP paper sensor.
Replace the engine PWB and check for correct operation
(see page 1-5-27).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Cassette size switch and engine PWB (YC17)
Replace the cassette size switch.
Replace the engine PWB and check for correct operation
(see page 1-5-27).
1-4-36
2PX/2PY
Y116670-7