Using The Management Access Program Or A Standard Web Browser; Where To Place The Map Utility - Panasonic KX-PNBC8 User Manual

Chapter 6
Using the Management Access Program or a
Standard Web Browser
MAP has the following requirements:
• The Microsoft TCP/IP protocol stack must be installed on this PC. It is not
necessary for the network to support TCP/IP. However, the TCP/IP protocol must be
installed on this PC even if the network does not support it.
• A web browser must be installed on this PC. Both Netscape Navigator and Internet
Explorer are supported.
• If the IPX search functions are to be used, then IPX must be installed on this PC.
Both the Microsoft and the NetWare 32-bit stacks are supported.
The Management Access Program (MAP) uses a Windows-based HTML viewer
program linked with a proprietary bi-directional IPX/IP channel program to allow
access to the Network Card's HTML-based monitoring and maintenance capabilities.
An IP Web Browser also provides access to this capability directly. Either program
allows you to:
• Configure your network protocols for the Network Card.
• Reset the Network Card remotely to either clear an error condition, or return the
print server to its factory default settings.
• Troubleshoot problems in the Network Card.
• Enable or disable the status page printout.
• Access a context-sensitive help menu that fully explains how to use each
Management Access Program feature.
Note: To be able to change parameter values with the Management Access Program or
the Web Browser, you must know the Network Card management password. The
factory default password is "sysadm".

6.1 Where to Place the MAP Utility

The utility can be installed on any workstation hard drive or network drive.
80