Panasonic KX-PNBC8 User Manual page 51

Setting Up lpr on the Workstation
The following procedure is used to set up the lpr spooler on the Windows NT 4.0
server.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Ports tab.
5. Click Add Port....
The Add Port window is displayed.
6. Select LPR Port, then click New Port....
The Add LPR compatible printer window is displayed.
Line 1: Address of host providing lpd (Print server);
enter IP address.
Line 2: Name of printer on that machine - enter PORT1 (the
word PORT MUST be in uppercase).
7. Click OK to exit.
Your Network Card is now configured to operate Windows NT. You may print from any
application by following the normal print instructions for that application.
51