Panasonic KX-PNBC8 User Manual page 21

13. Enter the Subnet Mask.
- Pressing the
- Pressing the
14. Press the ENTER button.
The cursor moves to the next 3-digit value.
15. Repeat steps 13 and 14 to finish entering all the 3-digit values of the
Subnet Mask.
A message to confirm the Subnet Mask is displayed.
16. Press the ENTER button.
"Gateway Address" is displayed.
17. Press the ENTER button.
The printer enters the Gateway Address Input mode.
18. Enter the Gateway Address.
- Pressing the
- Pressing the
19. Press the ENTER button.
The cursor moves to the next 3-digit value.
button once will increase the value by one.
button once will decrease the value by one.
Ethernet Subnet Mask
xxx.xxx.xxx.xxx
Ethernet Subnet Mask
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx OK?
Yes
Network Protocol setup
Gateway Address
Gateway Address
xxx.xxx.xxx.xxx*
button once will increase the value by one.
button once will decrease the value by one.
Gateway Address
xxx.xxx.xxx.xxx
Gateway Address
xxx.xxx.xxx.xxx
21