Panasonic KX-PNBC8 User Manual page 17

When Setting from the DHCP Server
If the administrator manages the network at the DHCP server, each address is
automatically assigned from the DHCP server. Proceed to When Setting from the
DHCP Server in Step 1 on
When Setting by Direct Entering
If the administrator manages the IP address, contact your network administrator to
confirm the values before the setup. If not, set the unique value that is not used for any
other device on the network by referring to the example shown below. After setting up
the IP address, proceed to When Setting by Direct Entering in Step 1 on
Example: How to assign the IP address, Subnet Mask and Default Gateway values.
IP Address:
Subnet Mask:
Gateway:
Note: It is recommended to select "IPX Peer-to -Peer printing using IPX protocol" if you
have trouble setting up the IP address values. Its settings are comparatively easy.
page 18.
10.x.x.x (For x, you can choose any number from 0 - 255 except
0.x.x.x and 255.255.255.255)
Be sure that the IP address is not already assigned to any other
device.
255.000.000.000
It is the same value with all devices.
Not required.
page 19.
17