Panasonic KX-PNBC8 User Manual page 22

20. Repeat steps 18 and 19 to finish entering all the 3-digit values of the
Gateway Address.
A message to confirm the Gateway Address is displayed.
21. Press the ENTER button.
The printer restarts the system automatically, and "Initializing" is
displayed.
22. After approximately 3 minutes, you may check your settings.
(1)On your computer, click Start, select Programs, then click
(2)From the DOS prompt type "ping" followed by a space then the
If the following notation is displayed, they are set correctly.
Pinging 179.40.0.5 with 32 bytes of data:
Reply from 179.40.0.5: bytes=xx time<xxms TTL=xx
Reply from 179.40.0.5: bytes=xx time<xxms TTL=xx
................................................
................................................
If the ping command returns a "Request timed out" message or "Reply from
xxx.xxx.xxx.xxx: Destination host unreachable" message or other error
messages you should recheck your settings. If they are not set correctly, you should
go back to Chapter 2 on
22
xxx.xxx.xxx.xxx OK?
Yes
Initializing
- MS-DOS Prompt.(for Windows 95/Windows 98)
- Command Prompt.(for Windows NT 4.0)
printer's IP Address, then press the ENTER key.
For example, ping 179.40.0.5.
page 10.