Table of Contents
Advertisement
SD-AT100H
Speaker connection
Front speaker
(right)
Red
Black
Red
Red
Grey
Surround speaker
(right)
Black
Red
Grey
Setting the clock
By setting the unit on time, you can use it not only as a clock but also for timer play-
back.
[Back]
In this example, the clock is set for 9:30.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button.
3
Within 10 seconds, press the
and then press the ENT button.
OPERATION MANUAL
Centre
speaker
Green
White
Blue
Purple
Subwoofer
Black
Purple
or
button to select "ADJUST",
Red
Green
Black
Red
4
Press the or
button to adjust the hour
and then press the ENT button.
Press the
or
button once to advance the time by 1 hour. Hold it down to ad-
vance continuously.
5
Press the
or
button to adjust the min-
utes and then press the ENT button.
Press the
or
button once to advance the time by 1 minute. Hold it down
to advance continuously.
The hour will not advance even if minutes advance from "59" to "00".
The clock starts from "0" second. (Seconds are not displayed.)
To confirm the time display:
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control.
The time display will appear for about 5 seconds.
[When the power is on]
Press the TIMER button.
Within 10 seconds, press the
The time display will appear for about 10 seconds.
Caution:
Unplugging the unit or power failure will clear the clock setting.
Readjust the clock.
To readjust the clock:
Perform "Setting the clock" from the beginning.
In step 2, "TIMER STANDBY" appears.
In step 3, press the
or
ton.
– 8 –
Front speaker
(left)
Black
You can connect
separately available
woofer to enjoy more
of the bass sound.
Surround speaker
(left)
Black
Blue
or
button to select "CLOCK".
button to select "CLOCK", and the press the ENT but-
Red
White
Red
Advertisement
Table of Contents
