Table of Contents
Advertisement
SD-AT100H
2. Preparation of the DVD set
(1) While pressing down the PLAY and VOLUME UP keys simultaneously, press the POWER key to enter the TEST MODE.
"TEST" appears.
(2) After selecting "DVD WRITE" using the VOLUME UP/DOWN key, press the PLAY key or "6" key on the remote control.
"DVD WRITE" appears.
3. Versionup.
Click "Data Send" if preparation completes.
When data transmission is started, PC side shows progress bar
indication
When data wanting to stop data send, click [STOP] button by PC.
4. Data send finish.
When a download is successful, 100 %is indicated in PC side.
In a normal end, cut a power supply of the set side after avoiding
the tool.
5. Versionup finish.
Click "EXIT" in download window.
In a normal end, cut a power supply of the set side after avoiding
the tool.
Click "EXIT" in DVD Version Up window/
6. Version confirming procedures
(1) Prepare a remote control provided with this unit.
(2) Connect this unit to the TV monitor and check the version
number on the TV screen in the DVD TEST MODE.
If the new version number is displayed, the operation is
completed.
– 32 –
Advertisement
Table of Contents
