SATO CL4NX Operator's Manual page 735

Error Message 1058 (CRC Check Error)
When there is an error with the printer, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Press the
Cause and Countermeasure
Cause
◦ CRC has not been added to the data.
◦ CRC does not match.
Countermeasure
Check transmitted data and interface settings.
◦
◦
printing from the next item.
Contact your SATO technical support center if the error cannot be resolved.
Contact Information for When You Are in Trouble
button (CANCEL) or
button (PRINT): Continue printing from the print data where the CRC error occurred.
button (CANCEL): Cancel the print data where the CRC error occurred and continue
button (PRINT).
735