Transmitting - Furuno CHS-5LMARK-2-55 Operator's Manual

1. OPERATIONAL OVERVIEW
1.3.3

Transmitting

[TRANSMISSION] in the [SONAR] menu is off in the default setting. If it is has been
set to [ON], the procedure below is not necessary. When the transducer is lowered,
transmission starts and when it is raised transmission is stopped.
1. Press the MENU key to open the menu.
2. Use the RANGE control to choose [MENU MODE] at the top of the screen.
3. Use the GAIN control to choose [SONAR].
**
[MENU MODE]
DISPLAY MODE
TX OUTPUT
PULSE LENGTH : 8
TX CYCLE
TVG NEAR
TVG FAR
AGC
2ND AGC
NOISE LIMITER
COLOR CURVE
COLOR RESPONSE : 1
DELETE COLOR : 0
ECHO AVERAGE : 1
INT REJECT
HOR BEAMWIDTH : WIDE
VER BEAMWIDTH :
COLOR
ERASE MARKS
ALARM LEVEL
AUTO TRAIN
TRAIN SECTOR
AUTO TILT
TILT ANGLE
TRANSMISSION : ON
AUDIO VOLUME : 10
ASSIGN SETTING : F1 KEY
ASSIGN MENU
PRESS [MENU] KEY TO EXIT
4. Use the RANGE control to choose [TRANSMISSION].
5. Use the GAIN control to choose [ON]. The sonar starts transmitting and the sonar
picture appears.
6. Press the MENU key to close the menu.
To turn off transmission, choose [OFF] at step 5. "TX OFF" appears at the top right
corner of the sonar display when the transmitter is turned off.
1-4
SYSTEM MENU **
: SONAR
: COMBI-1
: 8
: 10
: 6
: 7
: 2
: 1
: 3
: 1
: 1
WIDE
: 1
: TRACK
: 9
: ON
: ±10°
: ON
: ±2-10°
: EXECUTE
(RANGE CTRL: U/D, GAIN CTRL: L/R)
SOUNDER MARKS
NORM COMBI-2
2 3
2 3
NARROW
NARROW
2 3
SHIP EVENT
OFF
±20° ±40°
OFF
±4-14° ±6-20°
OFF
F2 KEY F3 KEY
SYSTEM
4
4
4
FISH
±60°
±10-26°
F4 KEY