Honeywell XNX Quick Start Manual page 40

Status Indicator
Current Concentration Level
Figure 30. General Status Screen - Normal Operating Mode
The Normal Operating Mode icon
a warning is triggered, the Warning icon
on the General Status Screen.
If the fault icon is displayed,
alternate the display of the target gas concentration and the fault code.
When an alarm icon
both preset alarm levels. The General Status Screen displays the gas concentration
and alarm level exceeded.
In an overrange condition, the alarm icon will display but the target gas concentration bar graph
and alarm setpoints will flash, see illustration below.
In addition to the graphic Alarm, Fault and Warning indicators, the LEDs on the front
panel will flash in a pattern based on the condition:
40
(Bar Graph)
Warning Icon
Figure 31. General Status Warning Detail
a fault condition has been triggered and the display will
Fault Icon
Figure 32. General Status Fault Detail
is displayed, the target gas concentration exceeds one or
Alarm Icon
Figure 33. General Status Alarm Detail
Alarm Level Triggered
Full Scale
Concentration
Concentration Bar, Alarm Setpoints Flash
Figure 34. General Status Overrange Detail
Alarm 2 Set Point
Alarm 1 Set Point
gives visual indication of proper operation. When
appears and information is displayed
Warning Code
Fault Code
Alarm Level Triggered
Target Gas
Concentration
XNX Universal Transmitter Quick Start Guide
Current Concentration Level
(Numeric)
Concentration Units
Full Scale