Table of Contents
Advertisement
7
Check the SD memory card is
properly installed.
❶
Print a menu map.
Refer to "Printing a Menu Map"
Memo
more information.
❷
Check that the capacity of the SD
memory card is contained in the menu
map header information.
1
The SD memory card capacity in the header
Memo
information may differ from that shown in the
above example.
• When the SD memory card capacity is not contained in
Note!
the header information, reinstall the SD memory card.
Make sure the erasure protection switch of the SD
memory card is enabled.
• Be sure to read the manual provided with a
memory card authentication kit when using it.
For the printer to recognize the SD memory card,
you need to configure the SD memory card in your
printer driver.
When your computer has no printer drivers set
up for the printer, install a printer driver for the
printer on it, referring to "Installing a Printer
Driver"
(page
36), before using the steps from the
following page to configure the SD memory card.
30
Options
8
Configure the [SD memory card]
in the printer driver.
• Administrator privileges on the computer are
Note!
(page
32) for
For Those Using Windows PostScript
Printer Driver
❶
In Windows 7/Windows Server 2008 R2,
select [Start]-[Devices and Printers].
In Windows Vista/Windows Server 2008,
select [Start]-[Control Panel] and click
[Printers].
In Windows XP, select [Start]-[Control
Panel]-[Printers and Other Hardware]-
[Printers and Faxes].
In Windows Server 2003, Select [Start]-
[Printers and Faxes].
❷
Right-click the [OKI B840 (PS)] icon and
select [Properties].
❸
Set to [Installed] from [SD Memory
Card] of [Installable Options] on [Device
Settings] tab.
❹
Click [OK].
Memo
required.
• Unnecessary of this setting for Mac OS X PCL printer
driver.
When you click [Install] or [Get Installable options
automatically] with the printer connected over a
network via TCP/IP, configuration can be made
automatically.
Advertisement
Table of Contents
