Page 2
Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it.
Installation instructions are included for printers connected to computers with a USB cable, or a parallel cable. NOTE Oki Data recommends using a USB connection, as your printer is performance optimized for a USB interface. README FILE For the latest printer driver information, see the Readme file on the CD supplied with your printer.
Install Printer Software INSTALL THE PRINTER DRIVER NOTE The installation procedure may vary slightly depending on the operating system and interface ® connection you are using. Drivers are provided for Windows XP, 2K, Me, and 9x. 1. Make sure the cable is connected to your printer and PC and your printer is turned OFF. 2.
Using the Status Monitor Printer Setup The status monitor is your on-screen control panel. Use the status monitor to monitor printer operations and to control or Click this tab for access to the printer menu setup; you can set change printer settings. features like paper specifications, document layout, print quality, economy print, and test printing.
Operator Panel Functions LED INDICATORS The operator panel consists of a control button and 4 LED indicators. The LEDs show the status of your printer. The LEDs also have operating conditions that are indicated by slow or rapid CONTROL BUTTON blinking.