Advertisement
Page 14
Step 1D - Press
Step 1D
Then press
If screen in Step 2D does not appear the lock on the valve is
activated. To unlock press
press
press
Step 2D - Display shows the number of days since a regeneration
Step 2D
last occurred. Press NEXT to go to Step 3D. Press REGEN to exit
Diagnostics.
Step 3D - Display shows the volume of water treated in gallons
Step 3D
treated since the last regeneration. If Volume (gallons), 28/Volume
(gallons), or 7/Volume (gallons) was selected in Step 4CS and no
meter is installed this display will read 0. Press NEXT to go to
Step 4D. Press REGEN to return to previous step.
Step 4D - Display shows the days in service since start up. Press
Step 4D
NEXT to go to Step 5D. Press REGEN to return to previous step.
Step 5D - Display shows the total number of regeneration cycles
Step 5D
since start up. Press NEXT to go to Step 6D. Press REGEN to
return to previous step.
Diagnostics
and
simultaneously for 5 seconds and release.
and
simultaneously for 2 seconds and release.
and
simultaneously for 5 seconds and release. Then
and
simultaneously for 2 seconds and release.
, NEXT, REGEN,
in sequence, then
SD Manual
Advertisement
