Copper Ethernet Port Specifications; Fiber Optic Ethernet Port Specifications - Siemens RUGGEDCOM RSG2100 Installation Manual

RUGGEDCOM RSG2100
Installation Guide
Standard
IEEE 802.1x
IEEE 802.1Q-2005
(formerly 802.1s)
Section 4.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RSG2100.
NOTE
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages.
• F51 transceivers are rated for -40 to 85 °C (-40 to 185 °F).
Connector
RJ45
RJ45
micro-D
micro-D
i
Auto-Negotiating
j
Shielded or unshielded.
k
Auto-crossover and auto-polarity.
l
Typical distance. Dependent on the number of connectors and splices.
m
RMS 1 minute.
Section 4.5

Fiber Optic Ethernet Port Specifications

The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM
RSG2100.
Copper Ethernet Port Specifications
10 Mbps Ports 100 Mbps Ports
ü
ü
Speed Duplex
10/100 Mbps FDX/HDX
1000 Mbps FDX/HDX
10/100 Mbps FDX/HDX
1000 Mbps FDX/HDX
1000 Mbps Ports
ü ü
ü ü
i j
Cable Type
> CAT-5 TIA/EIA T568A/B
> CAT-5 TIA/EIA T568A/B
> CAT-5 TIA/EIA T568A/B
> CAT-5 TIA/EIA T568A/B
Technical Specifications
Description
Port-Based Network Access Control
Multiple Spanning Tree Protocol (MSTP)
Wiring Maximum
k
Standard Distance
100 m (328 ft)
100 m (328 ft)
100 m (328 ft)
100 m (328 ft)
Chapter 4
m
Isolation
l
1.5 kV
1.5 kV
1.5 kV
1.5 kV
31