Table of Contents
Advertisement
Chapter 4
Technical Specifications
Section 4.3
Failsafe Alarm Relay Specifications
NOTE
The following specifications are for Class-2 circuits only.
Maximum Switching Voltage
30 VDC
125 VDC
125 VAC
220 VDC
250 VAC
Section 4.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM i800.
Speed
10/100Base-TX
b
Auto-Negotiating
c
Shielded or unshielded.
d
Auto-crossover and auto-polarity.
e
Typical distance. Dependent on the number of connectors and splices.
f
RMS 1 minute.
Section 4.5
Mechanical Specifications
16
Connector
RJ45
Parameter
Dimensions
Weight
Ingress Protection
Enclosure
Rated Switching Current
2 A, 60 W
0.24 A, 30 W
0.5 A, 62.5 W
0.24 A, 60 W
0.25 A, 62.5 W
b
c
Duplex
Cable Type
FDX/HDX
> Category 5
Refer to
Isolation
1500 V
for 1 minute
rms
Wiring
Maximum
d
e
Standard
Distance
TIA/EIA
100 m (328 ft)
T568A/B
Value
Chapter 5, Dimension Drawings
1.0 kg (2.2 lbs)
IP40 (1 mm or 0.04 in objects)
Cast Aluminum Enclosure
Failsafe Alarm Relay Specifications
RUGGEDCOM i800
Installation Guide
f
Isolation
1.5 kV
Advertisement
Table of Contents
