Download Print this page

Philips TTX400 Brochure & Specs page 25

Philips light-line system brochure

Advertisement

Maxos
Maxos projectors and HID solutions
Accent lighting is part of the integral concept of Maxos. The lightlines
can be equipped with almost the full range of different projectors next
to all the reflector solutions based on TL5 and TL-D fluorescent lamps.
Often in specific areas of shops projectors are requested in addition
to fluorescent general lighting.
For Maxos trunkings with flat ribbon cable (5 x 2.5, 7 x 2.5), units with
integrated 3C-rail are available. These units can be clicked into the
trunking sections like a regular electrical unit.
Projectors with a 3C adapter can be fixed to the system. These can
Type
4MX013
Facetted reflector with HID-lamp units
Suitable trunking unit
For trunking with flat ribbon cable (5/7 wires),
length of electrical unit 36 W (361), other lengths
available on request
Light source
1-lamp or 2-lamp version:
HID:
Double lamp version:
Gear
Electro magnetic (low loss), 230 V / 50 Hz:
Parallel compensated (IC)
Material
Steel, white-coated, shape of a facetted reflector
(F)
Installation
Turning bolt fixation (mechanical and electrical) on
trunking
Accessory
Decorative end-plates
Main applications
Retail (e.g. food, fashion)
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
8.24
Light-line systems
1 x or 2 x MASTER SDW-T / PG12-1 / 50,
100 W
1 x or 2 x MASTERColour CDM-T / G12 /
70 W
1 x MASTER SDW-T / PG12-1 / 50 W and 1 x
MASTERColour CDM-T / G12 / 35 W
1 x MASTER SDW-T / PG12-1 / 100 W and 1 x
MASTERColour CDM-T / G12 / 70 W
Maxos 4MX013 HID-lamp units
be fixed to the trunking similar to a regular electrical unit. 4MX013
facetted reflector units with HID lamps are often used to illuminate
fruit and vegetables in supermarkets.
The electrical components are integrated in a white-coated housing
with the shape of a facetted reflector. The lengths of these units
correspond to those of the 36 W trunking.
End-plates for the beginning and the end of the light-line are available
as accessories.
Type
4MX094
3C units for projectors
Suitable trunking and
For trunkings with flat ribbon cable (5/7 wires) to
projectors
fix projectors with 3C adapter
Length
Length of electrical unit 58 W (581) or 49 W
(491)
Projector fixation
3-circuit power track adapter (3C)
Material
Sheet steel, white (WH) or silver (SI)
Installation
Click-in fixation (mechanical and electrical) on
trunking
Main applications
Retail (e.g. food, fashion)
Maxos 4MX094 unit with integrated
3C rail and projector with 3C adapter
Philips indoor luminaires

Advertisement

loading

This manual is also suitable for:

Maxos tl5Maxos tl-dTetrix ttx150