Advertisement
Maxos
Maxos aluminum reflectors and optics
The aluminum reflectors for TL5 and TL-D lamps are optimized
for applications in supermarkets, shops, distribution centers and
industry. They are made of high-quality aluminum and are available for
electrical units holding 1 or 2 TL5 or TL-D lamps. A semi-high-gloss
(D) aluminum reflector is available for wide-beam, medium-beam,
narrow-beam, asymmetrical beam and (double-) asymmetrical-beam
light distributions. For very narrow beams a high-gloss (C) aluminum
reflector is available. For TL-D, a perforated decorative high-gloss
aluminum reflector in wide beam can be ordered.
TL5 aluminum reflectors can be equipped with aluminum louvers with
profiled lamellae (M2) or with a simple white steel louver (L) for glare
reduction.
Maxos TL5
Aluminum reflectors and optics
Type
4MX692 (TL5 reflector)
4MX693 (TL5 louver/optic)
Suitable electrical unit
For 1 and 2 TL5 35, 49, 54 and 80 W versions
Material and light
Reflector:
distribution
Louver:
Accessory
Aluminum reflector end caps (9MX056 EP/TL5 SI
/ WH)*, coupling pieces (9MX056 CP/TL5) *not
for C-NB reflector
Remarks
Optics and louvers are suitable for 1- and 2 lamp
versions
Main applications
Retail (e.g. food, fashion)
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
8.12
Light-line systems
Semi-high gloss aluminum (D), narrow beam
(-NB)
Semi-high gloss aluminum (D), medium beam
(-MB)
Semi-high gloss aluminum (D), wide beam
(-WB)
Semi-high gloss aluminum (D), asymmetric beam
(-A)
Semi-high gloss aluminum (D), double
asymmetric beam (-DA)
High gloss aluminum (C), very narrow beam
(-NB)
Aluminum with profiled lamelae (M2)
Steel, white coated (L-D WH)
All the reflectors are fixed to the electrical unit via a simple click. They
can be connected to each other in a line by means of an overlap; for
the TL5 versions, additional coupling pieces (9MX056 CP/TL5) are
available as an option. Also for the TL5 versions, decorative end-plates
for the beginning and end of the light-line are available as accessories.
Maxos TL-D
Aluminum reflectors
Type
4MX092
Suitable electrical unit
For 1 and 2 TL-D 36 and 58 W* versions
Material and light
Semi-high gloss aluminum (D), narrow beam (-NB),
distribution
1- and 2-lamp
Semi-high gloss aluminum (D), wide beam (-WB),
1- and 2-lamp
Semi-high gloss aluminum (D), asymmetrical beam
(-A), 1- and 2-lamp
High gloss aluminum (C), very narrow beam (-NB),
1-lamp
High gloss aluminum, perforated (CP), wide beam
(-WB), 1-lamp
Remarks
*2-lamp versions of aluminum reflectors to
be used with dedicated electrical unit (with
lampholder F32 mm)
Main applications
Industry, logistics, retail
Philips indoor luminaires
Advertisement
