Maxos
Maxos TL-D Wing optic
The Wing optic is a reflector solution creating soft indirect light,
without glare, and is ideal for office and shop applications. Designed
for electrical units holding 1 or 2 TL-D lamps, it is made of white
powder-coated steel and a perforated curved sheet conceals the
lamps. The 2-lamp version must be used with special electrical units
(lamp holder F32 mm).TL5 solutions are available on request.
Maxos TL-D
Wing optic
Type
4MX092 WG
Suitable electrical unit
For 1 and 2 TL-D 36 and 58 W* versions
Material
Steel, white coated (WH)
Installation
Click-in fixation on electrical unit
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
8.18
Light-line systems
4MX092 WG Wing optic
The Wing optic is fixed to the electrical unit via a simple click-in. The
reflectors can be connected to each other without additional coupling
pieces, as they are delivered with an integrated connection side at one
end of the reflector. Decorative end-plates for the beginning and end
of the light-line are available as accessories.
Accessory
End plates (9MX056 EP-WG)
Remarks
*2-lamp versions of the Wing optic to be used
with dedicated electrical unit (with lampholder
F32 mm)
Main applications
shops, offices
Philips indoor luminaires