Config Teleworker; Diagnostics - Mitel MiVoice 6920 User Manual

Mitel MiVoice 6920 IP Phone User Guide
5. Enter a value, in minutes, using the dialpad keys. You can set the timer from 1 to 90 minutes.
The default is 5 minutes.
6. Press the down navigation key to highlight Dimmer Level.
7. Use the left and right navigation keys to increase or decrease the intensity of brightness on the
LCD when the screen saver is displayed (valid values are from Levels 0 (LCD off) to 5 (brightest).
8. Press the Save softkey to save your changes.

Config Teleworker

The Mitel MiVoice 6920 IP phone can be configured to work in teleworker mode, which allows remote
workers access to the same rich communications capabilities as in-office workers when using the
IP phones.
The Config Teleworker menu allows you to enter the IP address of the server providing the
teleworker configuration details.
To enter the IP address of the teleworker configuration server on the Mitel MiVoice 6920 IP phone:
1. Press the
2. Navigate to Config Teleworker using the navigation keys and press the Select softkey.
3. Enter the IP address of the server providing the teleworker configuration details in the IP
Address field using the dialpad keys.
Note: The Backspace softkey can be used to delete the last digit/character entered and the
dot (".") softkey can be used to enter a dot where applicable.
4. Press the Save softkey to save your changes.

Diagnostics

The Diagnostics menu allows you to perform the following diagnostic routines:
• Audio Diagnostics
• Ping
• TCP DUMP
• DHCP Trace
28
(Settings) key on the phone to enter the Static Settings menu.
Mitel MiVoice 6920 Config Teleworker