How Do I Find The Ip Address Of My Phone; Why Does My Phone Display The No Service Message; How Do I Change My User Password; Why Does My Phone Display Bad Encrypted Config - Mitel 6873i User Manual

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

HOW DO I FIND THE IP ADDRESS OF MY PHONE?

Instructions on where to find the IP address of your phone can be found in
IP Address" on

WHY DOES MY PHONE DISPLAY THE NO SERVICE MESSAGE?

The phone displays the No Service message if the SIP settings have not been set up correctly.
Contact your System Administrator for more information.

HOW DO I CHANGE MY USER PASSWORD?

You can change the user password from the IP phone UI or the Mitel Web UI. See "Password"on
page 72 and "Configuring Lock Settings Using the Mitel Web
information.

WHY DOES MY PHONE DISPLAY BAD ENCRYPTED CONFIG?

The IP phone displays Bad Encrypted Config because encrypted configuration files are
enabled but the decryption process has failed. Report this error to your System Administrator.

HOW DO I RESTART THE IP PHONE?

You can restart the phone from the IP phone UI or through the Mitel Web UI. See
Your Phone Using the IP Phone
Web UI"on page 90

HOW DO I LOCK MY PHONE?

You can lock your phone to prevent the phone from being used or configured. You can lock the
phone using any of the following:
• At the path Options > Phone Lock on the IP phone UI. See
more information.
• At the path Operations > Phone Lock on the Mitel Web UI. See
Using the Mitel Web
• At a configured key on the phone. For more information about configuring a Lock/Unlock
key on your phone, see
248
page 34.
UI"on
for more information.
UI"on page 74
"Phone Lock Key"
page 89 and "Restarting Your Phone Using the Mitel
for more information.
on page 142.
"Finding Your Phone's
UI"on page 74 for more
"Restarting
"Phone Lock"on page 73
"Configuring Lock Settings
for