Electrically Operated Chair - Invacare Rea Bellis Manual

1.
2.
3.
®
REA BELLIS

ELECTRICALLY OPERATED CHAIR

A
B
1. Tilt adjustment
The angle of the seat unit can be adjusted from –1º
to 15º. Tilt the seat unit by pressing hand control
(A). Clear symbols on the hand control show you
where to press.
The risk of trapping fingers, etc., is greater
!
in electric adjustments than in user-operated
adjustments. Bear in mind, for example, that
a child may get hold of the control box,
press the controls and get trapped, or trap
the user.
2. Backrest angle adjustment
The angle of the backrest can be adjusted from
0º to 30º. You adjust the angle of the backrest
by pressing hand control (B). Clear symbols
on the hand control show you where to press.
The risk of trapping fingers, etc., is greater in
!
electric adjustments than in user-operated
adjustments. Bear in mind, for example, that a
child may get hold of the control box, press the
controls and get trapped, or trap the user.
The electric engine to the backrest adjustment
!
mustn't be used when the backrest isn't locked
in it's attachment.
3. Charging the battery
If your wheelchair has electrically operated angle
adjustment,the battery must be charged from time
to time. If the angle adjustment function has been
used during the day it is convenient to use the
battery charger during the night.
The battery is charged by plugging the battery
charger, supplied with the chair, into a wall socket
and then connecting the charging cable into the
socket on the side of the control unit.
It takes approximately 12 hours to fully recharge
a 50 % discharged battery.
Work on the handset should only be carried out
by personnel who have been instructed in how it
works.
15