Transport Of Wheelchairs In Vehicles - Invacare Rea Bellis Manual

Transport of wheelchairs in vehicles

®
The Rea Bellis has been tested for safety in collisions according to ISO 7176-19:1999. The Rea
used for transport in vehicles that have been specially adapted for this purpose.The wheelchair must be securely
fastened in the vehicle according to the methods described on the following page. Remember that the best solu-
tion is always to move the user from the wheelchair into a normal car seat.
TEST REPORT FROM DYNAMIC SAFETY RESTRAINT TEST
Test no:
Date:
Test no:
Date:
Pulse specification
Wheelchair
Wheelchair
Safety restraint device
User safety belt
Test dummy
The safety restraint devices used in this test must be approved according to ISO10542. We have
chosen to work with Unwin, a well-known quality manufacturer of safety restraint devices for wheel-
chairs.
REA ® BELLIS
09KM
07/03/00
P300998A
19/02/03
Test To Be Conducted
ISO/DIS 7176/19 (December 1999) (Rea
ISO/DiS 7176-19 and ISO 10542 (February 2003) (Rea
Manufacturer:
Model:
Mass:
Configuration:
Manufacturer:
Model:
Attachment:
Configuration
Manufacturer:
Model:
Hybrid II (LC)
Hybrid III
Mass:
Customer: Invacare Rea AB
Customer: Invacare Rea AB
® Bellis)
Invacare Rea AB
® ®
Rea Bellis and Rea Bellis Transport
38,6 kg
Forward facing
Unwin Safety Systems
4 Pt.WWR/ATF/K/R and WWR/HD/ATF/K/R
Unwin LowProfile Rail
4 Pt. Restraint
Unwin Safety Systems
Double Inertia,ATF, 3 Pt
Assy with short third point for Inertia and
Stalk
®
Rea Bellis
Rea ® Bellis Transport
76 kg
®
Bellis can be
® Bellis Transport)
23