Electrically Operated Chair; Charging The Battery - Invacare Rea Assist Manual

1.
2.
3.
18

ELECTRICALLY OPERATED CHAIR

B
B C
1. Tilt adjustment
C
Tilt the seat unit (seat and backrest) by using
the lower part of the control panel. Press (B) to
adjust the angle of the seat unit backwards or
press (C) to adjust the angle forwards.
The hand control should only be used by
authorised personell.
The risk of trapping fingers, etc, is greater in
electric adjustments than in user-operated
adjustments. Bear in mind, for example, that
a child may get hold of the controls and get
trapped, or trap the user.
2. Backrest angle adjustment
Adjust the angle of the backrest by using the upper
part of the control panel. Press (B) to adjust the
angle of the backrest forwards or press (C) to
adjust the angle backwards.
The risk of trapping fingers, etc., is greater in
electric adjustments than in user-operated
adjustment. Bear in mind, for example, that a
child may get hold of the control box, press the
controls and get trapped, or trap the user
The hand control should only be used by
authorised personnel..

3. Charging the battery

If your wheelchair has electrical angle adjustment
the battery needs to be charged. If the angle ad-
justment function has been used during the day, it
is a good idea to leave the charger on overnight.
Charge the battery by plugging the battery charg-
er supplied with the chair into a wall socket. Then
connect the charger cable to the output on the
side of the control box. It takes about 12 hours
to charge a battery that has been used 50% of its
capacity.
Work on the handset should only be carried
out by properly trained personell.
REA® ASSIST