D
E
12
3. Loosen the rear screw (D) on the side of the tube
and adjust the legrest to the desired angle. Retigh-
ten the screw. Repeat this procedure to adjust the
angle of the other legrest.
4. Loosen the frontal screw (E) on the side of the
tube to adjust the depth of the legrest.Tighten the
screw when you have found the desired depth.
Repeat this procedure to adjust the depth of the
other legrest.
5. The angle of the legrests can be adjusted upwards
if required.
®
REA
BELLIS