Part Identification Chart - ProForm PFEVEL12716.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M5 Washer
(94)–2
M4 x 16mm
Screw (101)–16
M10 Split
M8 Washer
(97)–8 Washer (105)–8
#8 x 12mm
Screw (111)–4
M8 x 38mm
Bolt (96)–4
M10 x 122mm
Screw (104)–4
16mm Wave
Washer (54)–2
M8 x 14mm
Shoulder
Screw (126)–2
M10 x 25mm
Screw (99)–4
6
M8 Locknut
(102)–4
M8 x 13mm
Screw (82)–6