Encryption type
Passphrase
IP Address
You can connect to a WPA2-PSK (AES) access point using the settings above.
Settings in SimpleAP mode (Factory default settings)
SSID
Passphrase
IP Address
Subnet mask
In SimpleAP mode, DHCP Server is working and assign IP address to host automatically.
Printing communication protocol
LP, LPR:
TCP Socket Port:
LP, LPR
Max. simultaneous connections:
Number of connections for which printing is
available:
Time out:
Job cancel:
Banner printing:
Socket communication
Port type
Port number
Port communication direction
Max. simultaneous connections
Number of connections for which printing is
available
Time out:
Notes on Using the Wi-Fi Model
Keep the printer away from the devices, such as kitchen microwaves, that may cause radio wave interference.
Use channels that are away from the frequency bands that may cause radio wave interference.
94
Parameter
Parameter
Transfers printing data
Transfers printing data and printer status via bidirectional direct socket communication.
Setting value
WPA2-Personal
EpsonNet
Automatically acquired by DHCP
Setting value
EPSON_Printer
12345678
192.168.192.168
255.255.255.0
2
1 (Other users need to wait until printing is com-
pleted.)
1 min. (changeable)
Not available
Not available
TCP communication port for direct printing
9100
bidirectional
3
1 (Other users need to wait until printing is com-
pleted.)
5 min. (changeable)