Printing Via Ipp (Internet Printing Protocol) - Epson AcuLaser CX37DN Series Reference Manual

Caution:
c
You should always notify your network's administrator before changing the machine's IP address.
1. Turn on your PC and machine.
2. After the printer's message window is initialized, select UTILITY, and then press the Select key.
3. Select ADMIN. MANAGEMENT, and then press the Select key.
4. Use the keypad to input 6-digits administrator number.
5. Select NETWORK SETTING, and then press the Select key.
6. Select IP ADDR. SETTING, and then press the Select key twice.
7. Use the keypad to input each number, and then press the Select key.
8. Select SUBNET MASK, and then press the Select key.
9. Use the keypad to input each number, and then press the Select key.
10. Select GATEWAY, and then press the Select key.
11. Use the keypad to input each number, and then press the Select key.
12. Print a configuration page to verify that the correct IP address, subnet mask, and gateway have
been set.
13. After the machine's message window is initialized, install the printer driver.

Printing via IPP (Internet Printing Protocol)

IPP (Internet Printing Protocol) is a protocol for end users' most common printing situations over the
Internet. It allows users to find out about a printer's capabilities, submit print jobs to a printer,
determine the status of the printer or print job, and cancel a previously submitted print job.
Note:
❏ You must have administrator privileges in order to install the printer driver.
❏ If the User Account Control window appears when installing on Windows Vista/7/Server 2008/
Server 2008 R2, click the Continue button or the Yes button.
Epson AcuLaser CX37 Series Reference Guide
Network Printing 63