Setup Using Epsonnet Config - Epson tm-m30 Technical Reference Manual

Hide thumbs Also See for tm-m30:
Table of Contents

Advertisement

Setup using EpsonNet Config

Execute EpsonNet Config, select the target printer from the displayed device list, then check and change the set-
tings.
If the printer is still set to factory defaults, the printer's MAC address is listed up, even if the computer does not
have the same network address.
The initial setting uses an IP address for the printer provided by a DHCP server. Since you cannot
complete setup if there are conflicting IP addresses on the network, make sure that there are no
other devices on the network that conflict with the IP address provided by the DHCP server. If a
DHCP server is not available, a fixed IP address (192.168.192.168) is set approximately one minute
after turning on the printer. Also, if the Ethernet cable is not connected, connect the Ethernet cable
and then run this process.
 When DHCP is enabled, the provided IP address is printed automatically. However, if the Ethernet
cable is not connected, and the Wireless LAN unit is not installed, printing is not performed.
1
Connect the printer to the same network as the computer where you installed Epson-
Net Config.
2
Start up EpsonNet Config.
The tool automatically detects printers connected to the network and displays a list.
It may take up to a minute for the printer to be displayed in the list.
If it is not displayed, check that [Filter] is set to "(All)" or "Network-connected devices", then click
[Refresh]. Or, select [Tools], then [Option], and check the settings of [Search Parameters].
3
Select the target printer, then click [Configuration].
If you cannot determine the target printer from the product name or the IP address, use the MAC
address. You can check the printer's MAC address on the status sheet.
4
Change the printer's settings based on the network setting information you received
from the network administrator.
Select an item from the menu and change the setting.
5
Once you set the necessary items, click [Transmit].
The changed contents are sent to the printer and the printer settings are changed.
For details about EpsonNet Config, see the manual (operation guide) installed together with the
tool or the online help.
Chapter 3 Advanced Usage
51
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents